• 1^st  Preparation of the measuring object
• 2^nd Preparation of Measuring Instruments
• 3^rd Starting the software LEVELSOFT PRO
• 4^th Definitions of the measuring task / Measuring layout
• 5^th Definition of the measuring parameters
• 6^th Definition of the way of measuring
• 7^th The measurement
• 8^th The output / The measuring protocol
• 9^th The output / Display in color

Explanations to the terms

• Measurements

• Measuring pattern

Every measurement taken will automatically be opened at the next start of the LEVELSOFT PLUS and has the ending “.wyp”. This is even the case when the measurement was not specifically saved as a measuring pattern.

Every measurement can be saved as am measurement (ending: ”wyl”) and/or a measuring pattern (ending: “wyp”).
Files with ending “wyp” are measuring patterns without any measuring data but only with the corresponding parameters like:

• Measuring layout

• Way of measuring (one instrument, two instruments etc.

• Step length

• Number of lines

• Limit of variation

• Drift tolerance yes or no

After starting the LEVELSOFT PRO the above window is opened with the last measuring pattern used. In this example it was the measurement of the flatness of an object.

• The individual points of the menu as well as the information needed are completed with self explanatory icons

• The software is made for use by console as well as by mouse

As mentioned the layout is opened as a measuring pattern and can now be used for the measurement planned or altered to the new requirements