• 1^st  Preparation of the measuring object
• 2^nd Preparation of Measuring Instruments
• 3^rd Starting the software LEVELSOFT PRO
• 4^th Definitions of the measuring task / Measuring layout
• 5^th Definition of the measuring parameters
• 6^th Definition of the way of measuring
• 7^th The measurement
• 8^th The output / The measuring protocol
• 9^th The output / Display in color

During the measurement the following information is displayed:

• Displayed value: Corresponds with the measuring result on the measuring instrument respectively on the Levelmeter. In case of differential measurement it is the difference of the two measurements (Value [A] - Value [B])

• Values: this is the displayed value reduced to the base length used

• Graphic: Displays the position where the measuring instrument must be placed

• Length: Total length of the longitudinal line

• Width: Total length of the transversal line

• Step length longitudinal: length of step per measurement

• Step length transversal: length of step per measurement

In our example the selected standard is DIN 876 and the quality of the flatness corresponds to grade “00”. The standard may be changed by using <Options>. The display may also be completely omitted.

The following international standards are available:

• DIN 876
• JIS
• GGG-P-463c
• BS 817