Dual axis Inclinometer BlueLEVEL-2D

The perfect dual axis inclinometer for measuring straightness, flatness, squareness and machine geometry

With the introduction of the BlueLEVEL-2D WYLER AG is underlining again its leading position in the field of inclination measuring instruments: The new dual axis Blue-LEVEL-2D combines for the first time two high-precision inclination sensors in a compact housing together with an integrated graphical display!

 


This opens new applications and facilitates the alignment of machines and tools substantially:

  • Efficient measurement of flatness and machine geometriy, like Pitch and Roll
  • Alignment of machines in two directions simultaneously
  • Alignment of reference plates
  • Pitch and roll measurement on machines
  • Alignment of cranes, containers, trucks etc.
  • Monitoring of cranes, containers, trucks etc.

The inclination measuring instrument BlueLEVEL-2D has the following features:

  • Rugged, rust-protected housing made of aluminium
  • High precision bases with three inserts made of hardened steel Ø 20mm with one M4 thread each
  • Large and very easy-to-read color display
  • Various display methods can be chosen
  • Wireless communication, based on Bluetooth technology
  • All current units can be indicated
  • The instrument is compatible with the full range of WYLER digital sensors
  • Powered by standard 1.5V batteries, rechargeable batteries or with main adapters
  • The internal software allows a simple zero setting, using a reversal measurement
  • Fulfils the strict CE- / FCC requirements (immunity / emission electromagnetic smog)
  • Options:
    • External power supply 24V
    • Cable to connect the instrument to a PC
    • Software to collect measuring data
    • Various attachable measuring bases on special request, like e.g. prismatic, varioBASE-2D

     

Graphical 2D-display

The 2D-display shows graphically the position of an object in space, respectively the change of its position, and makes the information easily understandable.


This substantially facilitates the alignment of e.g.

  • a machine
  • a reference plate
  • etc.

The following parameters (among others) can be set and changed on the BlueLEVEL-2D:

  • Units
  • Display of measuring range
  • Type of display
  • Filter settings

It is possible to send the measured data via an RS232 port to a PC/laptop and therewith to the
WYLER software wylerSPEC, wylerCHART and wylerDYNAM.

BlueLEVEL-2D

BlueMETER SIGMA

Calibration Certificate:

The BlueLEVEL-2D can be delivered with an internationally recognised Calibration Certificate against a surcharge

The data from the BlueLEVEL-2D can be transmitted to a BlueMETER SIGMA.

 

 

Two BlueLEVEL-2D connected to a laptop with USB cables allowing simultaneous

differential measurement in 2 directions.

The instruments are powered from the USB ports.

 

 

Two BlueLEVEL-2D connected via Bluetooth to a BlueTC and to a laptop.

 

 

Two BlueLEVEL-2D connected via Bluetooth to a BlueMETER SIGMA and to a laptop.

The BlueMETER SIGMA is powered from the USB port.

 

 

One BlueLEVEL-2D and two BlueLEVELs connected via Bluetooth to a

BlueMETER SIGMA and to a laptop.

The BlueMETER SIGMA is powered from the USB port.

MACHINE TOOLS / ROTATION CHECKS

Measuring task / Goal:
A machine tool must be checked on possible geometrical deviations. The check must show up eventual rotations of the table during displacement. The measurement of geometry should be made in a quick, reliable and simple procedure ant thus with a good cost-benefit effect.

more

MACHINE TOOLS / ROTATION CHECKS

Measuring task / Goal:
A machine tool must be checked on possible geometrical deviations. The check must show up eventual rotations of the table during displacement.

The measurement of geometry should be made in a quick, reliable and simple procedure ant thus with a good cost benefit effect.

more

LARGE GRINDING MACHINE WITH FLAT GUIDEWAYS

Measuring task / Goal:

On a surface grinding machine with 18-meter-long guideways set 1.3m apart, the co-parallelism of the two guideways has to be checked periodically. The guideways have to be within a plane with a maximum tolerance (error) of less than 0.1 mm. The complete machine and its guideways can be adjusted by means of supporting screws placed at 750 mm intervals.

more

MEASUREMENT OF PITCH AND ROLL ON A GRINDING MACHINE

Measuring task / Goal:

On a large surface grinding machine with guide ways with a length of 18m and a distance of 1.3 m pitch and roll have to be checked regularly. The maximum tolerance is 0.1 mm/m.

more

PITCH AND ROLL MEASUREMENT WITH 2D-ZEROTRONIC MEASURING UNIT AND MT-SOFT-SOFTWARE

Measuring task / Goal:
The machine should be very accurately levelled in X- and Y-direction. Afterwards a pitch and roll measuring report with numerical and graphical information is required.

more