|
New WyBus-Technology
WyBus is the
platform defining the communication between the “members” of a
measuring system as well as between that system and a connected PC/Laptop.
With
this new WyBus-platform, the communication has been substantially
enhanced: whereas in a BlueSYSTEM this communication was before limited
to more or less one BlueMETER and two BlueLEVELs, it is now open to an
almost unlimited number of levels and sensors. E.g. you could connect
two BlueLEVELs over Bluetooth to a BlueMETER and at the same time connect
two
Zerotronic sensors over cable to the BlueMETER. From the BlueMETER or
from a connected PC/Laptop you can then choose with what combination of levels
and sensors you would like to measure next, without having to disconnect
or to reconfigure the system!
This opens a wide field of new applications which can now be solved with
our instruments:
|
-
Monitoring an object or a machine with several wireless sensors
connected to one or several BlueTC. At any point of time you have
the flexibility to select the sensors you would like to measure with
-
You can work with several COM-Ports: You can e.g. connect one
Zerotronic through a Levelmeter 2000 to COM-Port 1 and a BlueLEVEL
through a BlueMETER to COM-Port 2
-
You can use the BlueMETER to show the value of 2 Zerotronic sensors
at the same time
|
 |
Compatability issues
This new
WyBus-technology is NOT backwards compatible!
The WyBus communication had to be completely redefined in order to allow
for all this new functionality and flexibility. As already mentioned
above this means that the new WyBus-platform is no longer backwards
compatible. |
|
This means the following |
-
BlueLEVEL and BlueMETER with old firmware are NOT compatible with
BlueLEVEL and BlueMETER with new
WyBus-firmware
-
Vice versa: BlueLEVEL and BlueMETER with new
WyBus
firmware are NOT compatible with BlueLEVEL and BlueMETER with old
firmware
-
Old Levelsoft Pro, MT-Soft and LabEXCEL are NOT compatible with
BlueSYSTEM equipped with new
WyBus-firmware
-
Vice versa: New Levelsoft Pro, MT-Soft and LabEXCEL are
NOT
compatible with BlueSYSTEM equipped with old firmware
-
BlueMETER will only work with Zerotronic-Sensors, if the BlueMETER is
equipped with the new firmware
|
|
The consequences are as follows: |
-
A
customer already using a BlueSYSTEM with old firmware who already
has an existing version of Levelsoft does not have to do anything,
the system will continue to function well =>
NO ACTION NEEDED
-
A customer receiving now a new BlueSYSTEM together with a new
Levelsoft will automatically get the new firmware and the new
software Levelsoft – everything is functioning fine
=> NO ACTION NEEDED
-
A customer receiving a new BlueSYSTEM who already has Levelsoft
has to
upgrade his Levelsoft PRO to the new Levelsoft PRO WyBus
-
A customer who already has a BlueSYSTEM and is buying a new
Levelsoft has to upgrade the firmware of the
BlueSYSTEM
|
|
All above cases for Levelsoft PRO are valid for MT-Soft and LabEXCEL WyBus as
well.
Which case corresponds to your situation?
You already have WYLER measuring-instruments and would like to purchase a
new measuring software?! |
|
You already have WYLER measuring-instruments and would like to
purchase Levelsoft PRO |
 |
 |
|
You already have WYLER measuring-instruments and would like to
purchase MT-Soft |
 |
|
|
You already have WYLER measuring-instruments and would like to
purchase LabEXCEL WyBus |
 |
|
|
|
|
|
You already have a WYLER measuring software and would like to
use it with new WYLER instruments?! |
|
You already have a valid licence for Levelsoft and would like to
use it with new WYLER-instruments
|
|
|
You already have a valid licence for MT-Soft and would like to
use it with
new WYLER-instruments
|
|
|
|
You already have a valid licence for LabEXCEL and would like to
use it with new WYLER-instruments |
|
|
|
|
How do I know whether a specific BlueSYSTEM has the old or the new
firmware? |
|
All
systems equipped with the new firmware will be marked with a yellow
label WyBus-Technology
|
 |
|
If
you are not sure you switch the instrument off and
hold the off-button until the firmware is shown
(about 10 seconds) |
Such an information indicates that this instrument still
has the old
firmware |
 |
 |
| |
BlueMETER
with old Firmware |
BlueLEVEL
with old Firmware |
| |
|
|
Such an information with the 3 groups on the bottom will
indicate, that
a new firmware is already loaded, if the number behind the
F ≥
0217, resp. F ≥ 0219
-
F0217, resp. F0219 indicates, that the firmware is
number 217, resp. 219 => has to be
upgraded !
-
T1W
indicates the Firmware-type
- B3.7.0, resp. B2.3
indicates the Bluetooth-version
|
 |
 |
BlueMETER
with new
Firmware |
BlueLEVEL
with new
Firmware |
| |
|
|
