Products | Software | LEVELSOFT PRO
 
SW LEVELSOFT PRO
Software LEVELSOFT PRO WyBus
 Measuring software or measuring the flatness of lines and surfaces
IMPORTANT: New WyBus-Technology

The actual software Levelsoft PRO, MT-SOFT and LabEXCEL WyBus, which are available as from May 2009 and can be downloaded from this homepage, are based on the new developed WyBus-Technology. Instruments of the BlueSYSTEM-familiy, which have been delivered since the same date have already the corresponding firmware installed and are compatible with the new software-generation.
For all other BlueSYSTEM-instruments a firmware-update is required to ensure the full functionality. Please follow the adjoining link.

If you are using an engineers-set of the NT-family with a Levelmeter 2000 and Minilevel NT or Leveltronic NT, you have to enter the serial-number into the instruments.
Installation Guide "Levelsoft PRO" / English version
Manual with general information on WyBus-technology as well as for firmware-upgrade
Manual Software Levelsoft PRO

The measuring software Levelsoft PRO (flatness measuring) for MINILEVEL and LEVELTRONIC NT instruments as well as for BlueSYSTEM
The previously described analogue instruments MINILEVEL, LEVELTRONIC and NivelSWISS (Niveltronic) can be used for all kinds of measuring tasks. Besides the simple task of defining a simple inclination the instruments may be used in a number of combinations and configurations (e.g. differential measurement with two instruments), the measurement of surface flatness of lines, the measurement of guide ways with twist or the flatness of large and small surfaces.

Download VIDEO Levelsoft PRO (*.mwv/15MB)
The advantage of using electronic instruments is the quick response and the fact that the results may be treated further electronically by collecting the data in a computer with the respective software.

One of the well proven software program is the WYLER LEVELSOFT PRO based on ISO1101 for measuring the flatness of lines and surfaces. The software products are constantly adjusted to the customers requirements and are used world-wide.
 
Scope of delivery: P/N / Art. Nr.
with Licence-Key		 P/N / Art. Nr.
with Dongle
Software LEVELSOFT PRO / Full version 024-LEVEL-1-L 024-LEVEL-1-D
Software LEVELSOFT PRO / Second Licence 024-LEVEL-2-L 024-LEVEL-2-D
Software LEVELSOFT PRO /
Upgrade version for licensed users of a former version		 024-LEVEL-U-L 024-LEVEL-U-D
Software LEVELSOFT PRO LIGHT / Simplified version 024-LEVEL-L-L 024-LEVEL-L-D
More information regarding  Software "LEVELSOFT PRO" :
 

Actual version Levelsoft PRO
2.1.0.42
The software Levelsoft PRO can be used without license for testing purposes for a period of two weeks from the installation. For a further utilisation the software must be validated within this period by WYLER AG.

Licence key for software
After the testing period the user has to buy a valid licence in order to continue to use it. He then receives either a validation key for one specific PC or (against a surcharge) a Hardware Dongle. The Dongle provides the option to install the same software on several computers and to move the Dongle to the PC on which the software is used.
Setup Levelsoft PRO
in all languages


Download
Download part of catalogue Software Levelsoft PRO

The LIFETOUR> below gives you a short introduction
in the new measuring software LLEVELSOFT PRO