Products | Instruments | Electronic Instruments | Minilevel + Leveltronic NT
Minilevel + Leveltronic NT
  • Is your task to measure flatness of lines and surfaces and need to have data in a simple way?

  • Do you need to assemble and measure machines in an economic way?

  • Does your machine tool not deliver the required accuracy and you must check the quality of the guide ways

Then you are urged to look more deeply into the electronic inclination measuring instruments MINILEVEL NT and LEVELTRONIC NT

OVERVIEW MINILEVEL NT LEVELTRONIC NT ENGINEER SET

Remarks:
The new instrument family BlueSYSTEM will replace the instruments of the NT series. However new orders for these instruments can still be supplied but only without the wireless modules. Upgrading of existing NT instruments with a wireless transmission module is available for a certain period of time.

The new instrument of the “NT” family was developed from the scratch according to the users requirement. These instruments will in the future replace the “classic” instruments.

The inclination measuring instruments MINILEVEL NT and LEVELTRONIC NT are suitable for a wide variety of kinds of measuring tasks. Apart from the simple measurement of an inclination angle, these inclination measuring instruments can be used in various combinations (e.g. single instruments or differential measurement with two instruments) for measuring the straightness of lines, guide ways with twist as well as flatness measurements of surfaces in various dimensions.

A software programme well proved in practical use is the WYLER PROGRAMME FOR GEOMETRICAL MEASUREMENTS LEVELSOFT PRO based on ISO 1101, serving for measuring lines and surfaces and being continuously enhanced according to the requirements of the users.

Minilevel Leveltronic
The most important features of the 
MINILEVEL NT / 11 are:
  • Large LCD display
  • 2 different sensitivity ranges selectable, what allows universal use
  • Precise zero point adjustment possible by using push buttons
  • A lightweight, compact instrument without cables (no accidental tearing down the instrument)
  • Quickly available reading on the spot
The most important features of the 
LEVELTRONIC NT / 41 are:
  • Small compact precision instrument with external display, especially useful when the result should be seen remotely or when no direct view to the instrument is possible. (The display unit can be brought to the point of adjustment)
  • Quickly available external reading
  • One measuring range only

MINILEVEL NT with a
horizontal measuring base

MINILEVEL NT with an angular base

LEVELTRONIC NT with a
horizontal measuring base
LEVELTRONIC NT with an angular base
 More information about "Introduction electronic instruments /
 Electronic instruments with capacitive measuring system"
Download part of catalogue / CABLES + ACCESSOIRES

MINILEVEL NT with an angular base and
wireless data transmission
 

LEVELTRONIC NT with a horizontal measuring base and wireless data transmission 

Engineerset without
wireless data transmission
 

Engineerset witht
wireless data transmission
 

Upgrading of existing inclination measuring instruments MINILEVEL NT and LEVELTRONIC NT with a wireless transmission module is still available for a certain period of time.

 With the newly developed RADIOMODULE WYLER precise inclination measurements can be performed without the interference of cables. The data is transmitted faultless from the instrument to the receiver module respectively to he Levelmeter 2000 or the Levelmeter "light".

from the Levelmeter the transmission to the PC / Laptop is done in the conventional way via RS232 cable. In the PC / Laptop the measuring results can be computed with the
software „LEVELSOFT PRO“.

ENGINEER SETS, with or without wireless data transmission, can be built up from any versions of MINILEVEL NT and/or LEVELTRONIC NT. It is also possible, and in many cases it may be sensible, to combine 1 MINILEVEL NT and 1 LEVELTRONIC NT. The advantage of such a configuration is, that the MINILEVEL NT can also be used as an autonomous measuring instrument.

The inclination measuring instruments MINILEVEL NT and LEVELTRONIC NT are suitable for a wide variety of measuring tasks. Apart from the simple measurement of an inclination angle, these inclination measuring instruments can be used in various combinations (e.g. single instruments or differential measurement with two instruments) for measuring the straightness of lines, guide ways with twist as well as flatness measurements of surfaces in various dimensions.

Download part of catalogue MINILEVEL NT
without wireless data transmission
  Download part of catalogue
Levelmeter 2000
Download part of catalogue LEVELTRONIC NT
without wireless data transmission
  Download part of catalogue
Levelmeter LIGHT
Download part of catalogue ENGINEER SET NT
without wireless data transmission
  Download part of catalogue
Remote Display
Download part of catalogue
OUTER DIMENSION of instruments and measuring bases
  Download part of catalogue
BlueTC
 
 
Contact Imprint Sitemap Partner-Link We about us Representatives Home
 
© Copyright 2012 WYLER AG, CH-8405 Winterthur
Last update:
11.05.12 08:18:56
Kontakt für weitere Informationen: wyler@wylerag.com
Contact address for additional information:
wyler@wylerag.com