The instruments of the BlueSYSTEM-family are perfectly suited to measure the geometry of machine tools and to verify the quality of objects like measuring and control surface plates. They combine highest precision with the robustness required on the shop floor and easiness of use. Together with the software LEVELSOFT and MT-SOFT these instruments are successfully used worldwide by leading machine tool manufacturers, machine maintenance companies and calibration laboratories.

The key features of the instruments of the BlueSYSTEM-family are

• highest precision and reproducibility

• shop floor suitability

• handheld and efficient to use

• simple and reliable operation

• compatibility with LEVELSOFT and MT-SOFT to record geometries

A typical BlueSYSTEM-set consists of 2 BlueLEVEL (BASIC) and a display unit BlueMETER (BASIC).

This newest generation of high precision electronic inclination measuring instruments or digital inclinometer of the BlueSYSTEM family are specifically suitable for the precision measurement of smallest inclinations. Applications are therefore in particular the flatness measurement of surface plates or the measurement of the geometry of machine tools.

The new BlueSYSTEM is a continuous further enhancement of the well known and well established inclination measuring instruments MINILEVEL NT and LEVELTRONIC NT. A BlueSYSTEM normally consists of one or two BlueLEVEL and an indicating unit BlueMETER SIGMA. Depending on the application the BlueMETER SIGMA can also be connected to a PC with evaluation software allowing the on-line evaluation and presentation of the measured values.

A set of instruments, also called ENGINEER SET BlueSYSTEM, normally consists of one or two BlueLEVEL and one BlueMETER SIGMA, forming the ideal tool for measuring flatness and machines under work shop conditions. Furthermore the ENGINEER SET can be used for any levelling task or analysis of rotations.

The ENGINEER SET BlueSYSTEM is specifically adapted to the needs of the metrology specialist taking care of machine tool components. There is a broad range of applications due to the possibility to use differential measurement.

The new BlueSYSTEM BASIC forms part of the family of BlueSYSTEM instruments and is a consistent further enhancement of the well proven inclination measuring instruments MINILEVEL NT and LEVELTRONIC NT. The BlueSYSTEM BASIC provides the same measuring precision but slightly reduced handling features compared to the standard BlueSYSTEM.

The main differences between the BlueSYSTEM BASIC and the BlueSYSTEM STANDARD are:
The BlueLEVEL BASIC does not provide an integrated display for the measuring values and can therefore only be used in combination with a BlueMETER BASIC

A set of instruments, also called ENGINEER SET BlueSYSTEM BASIC, normally consists of one or two BlueLEVEL BASIC and one BlueMETER BASIC, forming the ideal tool for measuring flatness and machines under work shop conditions. Furthermore the ENGINEER SET BlueSYSTEM BASIC can be used for any levelling task or analysis of rotations.