Products | Instruments | Inclination measuring sensor | Inclination sensor ZEROMATIC
The 2-dimensional inclination sensors ZEROMATIC 2/1 and 2/2 are perfectly suited for any application where monitoring of smallest changes in absolute inclinations over a longer period of time is required. The extremely high accuracy is achieved by measuring and compensating any drift of the absolut „zero“ by applying an automatic reversal measurement at defined intervals.
 

ZEROMATIC 2/1 + 2/2

2–DIMENSIONAL PRECISION INCLINATION SENSOR WITH AUTOMATIC REVERSAL MEASUREMENT

 
The 2-dimensional inclination measurement sensors ZEROMATIC 2/1 and 2/2 are perfectly suited for any application where monitoring of smallest changes in absolute inclinations over a longer period of time is required. The extremely high accuracy is achieved by measuring and compensating any drift of the absolut „zero“ by applying an automatic reversal measurement at defined intervals.
The ZEROMATIC 2/1
has 1 inclination sensor

The ZEROMATIC 2/2
has 2 inclination sensors

The ZEROMATIC 2/1 has 1 inclination sensor. Each reversal measurement will provide one set of absolute inclination values in X and Y direction.

The ZEROMATIC 2/2 has 2 inclination sensors. It can therefore provide continuous values for the inclination in X and Y direction. At defined intervals it will perform a reversal measurement and compensate any offset.

Typical applications are:

  • Monitoring of critical machines (Synchrotrons)
  • Monitoring of buildings, bridges or dams
  • Defining absolute zero references e.g. for radars

AaNDoS - the monitoring toolkit
The Multisensor System for Defomation Monitoring
Dr. Bertges Vermessungstechnik, D-66887 Neunkirchen a.P.Deutschland/ Germany
  • Open and scalable multisensor network
  • Easily configurable sensor nodes
  • Automatic deformation analysis
  • Multilevel alert
  • Automatic reporting
  • Webbased system presentation
  • 3D data presentation (3D-VRML)
  • Total solution, GNSS, inclination sensors, geotechnical sensors
AaNDoS-Sensors

AaNDoS is an open, sensor- and manufacturer-independent multisensor system. There are no restrictions in the number of Sensors, wich can be used in an AaNDoS project. Not just the geometrical changes, but even the complete context of a deformation can be monitored.





Overview currently supported sensor types / sensors:
Geodetical sensors Geotechnical sensors Miscellaneous sensors
Total stations
Topcon, Sokkia, Leica
Inclinometer Inclination sensors
eg. WYLER ZEROMATIC (WYLER AG)
GPS/GNSS
Topcon, Sokkia, NovAtel, Javad, Leica
Extensometer Pendulum measuring systems
eg. Huggenberger Telelot
(Huggenberger AG)
Digital levels
Topcon, Sokkia, Leica
Piezometer Hose water level

More information about  "Working principal of the ZEROTRONIC sensor":
More information about ZEROMATIC 2/1 + 2/2:
Download part of catalogue ZEROMATIC 2/1 + 2/2
Download part of catalogue ZEROTRONIC Sensor (Sensor only)
Download part of catalogue ZEROTRONIC Sensor (incl. LED-Kreuz)

 
Contact Imprint Sitemap Partner-Link We about us Representatives Home
 
© Copyright 2012 WYLER AG, CH-8405 Winterthur
Last update:
14.05.12 15:23:44
Kontakt für weitere Informationen: wyler@wylerag.com
Contact address for additional information:
wyler@wylerag.com