 |
|
Software
WYLER AG
/ WyBus-Technology |
|
New WyBus-Technology
WyBus is the platform
defining the communication
between the “members” of a
measuring system as well as
between that system and a
connected PC/Laptop.
With this new
WyBus-platform, the
communication has been
substantially enhanced:
whereas in a BlueSYSTEM this
communication was before
limited to more or less one
BlueMETER and two
BlueLEVELs, it is now open
to an almost unlimited
number of levels and
sensors. E.g. you could
connect two BlueLEVELs over
Bluetooth to a BlueMETER and
at the same time connect two
Zerotronic sensors over
cable to the BlueMETER. From
the BlueMETER or from a
connected PC/Laptop you can
then choose with what
combination of levels and
sensors you would like to
measure next, without having
to disconnect or to
reconfigure the system!
This opens a wide field of
new applications which can
now be solved with our
instruments:
-
Monitoring an object or
a machine with several
wireless sensors
connected to one or
several BlueTC. At any
point of time you have
the flexibility to
select the sensors you
would like to measure
with
-
You can work with
several COM-Ports: You
can e.g. connect one
Zerotronic through a
Levelmeter 2000 to
COM-Port 1 and a
BlueLEVEL through a
BlueMETER to COM-Port 2
-
You can use the
BlueMETER to show the
value of 2 Zerotronic
sensors at the same time
|
|
|
Compatability issues
This new WyBus-technology is
NOT backwards compatible!
The WyBus communication had
to be completely redefined
in order to allow for all
this new functionality and
flexibility. As already
mentioned above this means
that the new WyBus-platform
is no longer backwards
compatible.
This means the following:
-
BlueLEVEL and BlueMETER
with old firmware are
NOT compatible with
BlueLEVEL and BlueMETER
with new
WyBus-firmware
-
Vice versa: BlueLEVEL
and BlueMETER with new
WyBus
firmware are NOT
compatible with
BlueLEVEL and BlueMETER
with old firmware
-
Old Levelsoft Pro,
MT-Soft and LabEXCEL are
NOT compatible with
BlueSYSTEM equipped with
new
WyBus-firmware
-
Vice versa: New
Levelsoft Pro, MT-Soft
and LabEXCEL are NOT
compatible with
BlueSYSTEM equipped with
old firmware
-
BlueMETER will only work
with Zerotronic-Sensors,
if the BlueMETER is
equipped with the new
firmware
The consequences are
as follows:
- A
customer already using a
BlueSYSTEM with old
firmware who already has
an existing version of
Levelsoft does not have
to do anything, the
system will continue to
function well
=> NO ACTION NEEDED
-
A customer receiving now
a new BlueSYSTEM
together with a new
Levelsoft will
automatically get the
new firmware and the new
software Levelsoft –
everything is
functioning fine
=> NO ACTION NEEDED
-
A customer receiving a
new BlueSYSTEM who
already has Levelsoft
has to upgrade his
Levelsoft PRO to the new
Levelsoft PRO WyBus
-
A customer who already
has a BlueSYSTEM and is
buying a new Levelsoft
has to upgrade the
firmware of the
BlueSYSTEM
All above cases for
Levelsoft PRO are valid
for MT-Soft and LabEXCEL
WyBus as well.
|
|
|
|
|
|
|
|
|
|