IMPORTANT: New WyBus-Technology

The actual software Levelsoft PRO, MT-SOFT and LabEXCEL WyBus, which are available as from May 2009 and can be downloaded from this homepage, are based on the new developed WyBus-Technology. Instruments of the BlueSYSTEM-familiy, which have been delivered since the same date have already the corresponding firmware installed and are compatible with the new software-generation.

For all other BlueSYSTEM-instruments a firmware-update is required to ensure the full functionality. Please follow the adjoining link.

If you are using an engineers-set of the NT-family with a Levelmeter 2000 and Minilevel NT or Leveltronic NT, you have to enter the serial-number into the instruments.

The measuring software Levelsoft PRO (flatness measuring) for MINILEVEL and LEVELTRONIC NT instruments as well as for BlueSYSTEM

The previously described analogue instruments MINILEVEL, LEVELTRONIC and NivelSWISS (Niveltronic) can be used for all kinds of measuring tasks. Besides the simple task of defining a simple inclination the instruments may be used in a number of combinations and configurations (e.g. differential measurement with two instruments), the measurement of surface flatness of lines, the measurement of guide ways with twist or the flatness of large and small surfaces.

The software Levelsoft PRO can be used without license for testing purposes for a period of two weeks from the installation. For a further utilisation the software must be validated within this period by WYLER AG.

Licence key for software
After the testing period the user has to buy a valid licence in order to continue to use it. He then receives either a validation key for one specific PC or (against a surcharge) a Hardware Dongle. The Dongle provides the option to install the same software on several computers and to move the Dongle to the PC on which the software is used.