Software LabEXCEL, LabView-Application, WYLER AG, Software for inlination measurement, measuring parallelism linearity, software for measuring flatness, measuring squareness, machine tool inspection software, WYLER AG is the leading manufacturer of inclination sensors, clinometer, inclinometer, inclination measuring instruments, electronic inclination sensor, inclination measurement, inclination measuring instrument, tilt sensor

Software LabEXCEL
(LabView-Application)

IMPORTANT: New WyBus-Technology

The actual software Levelsoft PRO, MT-SOFT and LabEXCEL WyBus, which are available as from May 2009 and can be downloaded from this homepage, is based on the new WyBus-Technology. Instuments of the BlueSYSTEM-familiy, which have been delivered since the same date have already the corresponding firmware installed and are compatible with the new software-generation.
For all other BlueSYSTEM-instruments a firmware-update is required to ensure the full functionality. Please follow the adjoining link.

If you are using an engineers-set of the NT-family with a Levelmeter 2000 and Minilevel NT or Leveltronic NT, you have to enter the serial-number into the instruments.

LabEXCEL WyBus (LabView-Application)

The software LabEXCEL WyBus is a software package easy to operate for the displaying of the measuring values of WYLER inclination measuring instruments and sensors. The core is the WYLER WyBus module. This software ensures the communication between the inclination measuring instruments and sensors and the user interface of LabVIEW.

The measuring results can continuously be transferred into an EXCEL file for further treatment.

Requirements for the installation of the software „LabEXCEL WyBus“

Operating System requirements see at the bottom of this page
EXCEL from version 2003
framework 2.0 (Microsoft .NET framework 2.0). Download from [Windows Update] or installation from the CD-ROM delivered
Min. 20 MB free space on hard disc

Up to 10 inclination measuring instruments or sensors can simultaneously be read to the software „LabEXCEL WyBus“. In addition there is the possibility of displaying the difference of the measuring values between any pair of 2 different inclination measuring instruments or sensors.

Current Version LabEXEL WyBus	3.5.2.27
Setup SW LabEXCEL WyBus

Release Notes:

Version	Date	Changes
3.05.02.27	19.10.2012	Bug fixes: Data sampling improved Initial path to csv correcte Initial csv separator set to
3.05.02.26	20.6.2012	Bug fixes: Small changes Version Clino
3.05.02.25	15.06.2012	Bug fixes: Inconsistencies with csv save path resolved
3.05.02.24	30.05.2012	Changes: Resynchronization removed Bug fixes: ZeroOffset Data check improved, Button”Set Values” turns green when values ok. Buffer Restart improved. Known bugs: Loss of data during automatic restart of measurement in the range from 2s to 5s.
3.05.02.23	18.04.2012	Changes: csv separator char is stored Known bugs: Out of memory crash when program is running long time at a high sampling rate Deselected Sensors in between the select devices list causes misalignment in the graph and the .csv file.
3.05.01.22	8.03.2012	Bug fixes: Limitation +-12° removed

IMPORTANT:
The software LabEXCEL WyBus can be used without license for testing purposes for a period of two weeks from the installation. For a further utilisation the software must be validated within this period by WYLER AG.

Licence key for software
After the testing period the user has to buy a valid licence in order to continue to use it. He then receives either a validation key for one specific PC or (against a surcharge) a Hardware Dongle. The Dongle provides the option to install the same software on several computers and to move the Dongle to the PC on which the software is used.