Medical technology

MEASUREMENT OF THE FLATNESS IN AN OVEN WITH LIMITED HEIGHT

Subject:

A bio-technical company must measure the flatness of plates in an oven (at room temperature), to ensure that all objects stored in that oven are horizontally aligned. Distance between plates are only 100 mm. Size of each plate is 800 mm x 800 mm.

Normally a BlueSYSTEM Sigma together with wylerSPEC is used for flatness measurement. For this application here the height of the instruments exceeds the space available.

 

Measuring task:

Flatness measurement of the plates in the oven with precision inclination measurement instruments, despite the limited space available.

RADIO ONCOLOG / CALIBRATION ON LINAC MECHANICS

Subject: 

In order to keep service downtime of the Linac as short as possible, en efficient and accurate way to calibrate Gantry settings, collimator angle and to adjust Couch Roll is needed.

 

Measuring task / Goal:

The small dimensions (100x75x30 mm) and the light weight (485 Gramm) together with the 4 precise measuring bases situated around the periphery, make the CLINOTRONIC Plus  the ideal instrument for the calibration task.