MICROMETRIC SPIRIT LEVEL 53
Description:
MICROMETRIC SPIRIT LEVEL 53
Execution:
Sensitivity: see Specifications
- Standard version with flat measuring base and with a turnable lay-on shaft of hardened steel, according to Standards DIN877 + DIN2276/1
- Main scale on micrometer:
- Metric version: 1 division = 0.02 mm
- Inch-version 1 division = 1/1000 inch
- The main vial in the standard version has a sensitivity of 0.02 mm/m (other sensitivities available as per table below)
- Packed in a wooden storage case
- Due to the built in lay-on shaft and to the small contact face of the measuring spindle, the MICROMETRIC SPIRIT LEVEL 53 is particularly suitable for measuring inclinations over a distance of 100 mm, without disturbance of the measuring result by irregularities of the surface between the measuring points.
- The MICROMETRIC SPIRIT LEVEL 53 is also suitable for measuring the depth of cavities
- Measuring range:
- Metric version ±5 mm on a distance of 100 mm
- Inch version ±2/10 inch on a distance of 100 mm (~ 4 inch)
- Special isolating handles eliminate the transfer and influence of the body temperature
- Length 120 mm
- Total height 28 mm (height over micrometer: 50 mm)
- Width 25 mm
- Net weight (without case) 0.400 kg
- Gross weight 0.550 kg
Sensitivity: see Specifications
Calibration Certificate:
The MICROMETRIC SPIRIT LEVEL 53 can be delivered with an internationally recognised Calibration Certificate against a surcharge