BlueMETER BASIC

The BlueMETER BASIC is an intelligent digital display unit developed by WYLER AG for the inclination measuring instrument BlueLEVEL BASIC. Besides the excellent measuring accuracy the BlueLEVEL  BASIC instruments supply a fully digital signal for transmission over long distances without any loss of quality.


The BlueMETER BASIC are

  • A display unit
  • An interface between instrument and PC/laptop


On the BlueMETER BASIC various parameters may be set or changed, such as:

  • Measuring units
  • Port definition (port)
  • Filter-settings
  • Relative base length, etc.


It is possible to send measured data via an RS232 port to a PC/laptop or the software wylerSPEC, wylerDYNAM and LabEXCEL.


Features:

  • Design in aluminium housing and state of the art technology.
  • Wireless data transmission based on the internationally approved Bluetooth™ standard (option)
  • Large and easy-to-read LCD display
  • Display showing the automatically recognized instruments connecte
  • Powered by standard 1.5V batteries size C
  • In compliance with CE regulations and all applicable EMC regulations


The BlueMETER BASIC offer the possibility of displaying the measuring value of measuring instruments or also the difference between two sensors or instruments. For differential measurement the two measuring instruments respectively sensors must be connected to the two ports „A“ and „B“. A differential measurement between two instruments connected to the same port is not possible.  The following display settings are basically possible:

  • Measuring with one of several instruments connected to port „A“
  • Measuring with one of several instruments connected to port „B“
  • Differential measurement between two instruments connected to the ports „A“ and „B“
  • Simultanous display of one each of several instruments connected to the ports „A“ and „B“


The following functions are included in the BlueMETER BASIC:

  • Display of the measuring values in various measuring units
  • Display of measuring values of two instruments / sensors connected
  • Display of the difference between two instruments / sensors connected
  • Absolute measurements
  • Relative measurements
  • Evaluation and storage of the zero-offset of instruments/sensors connected
  • Battery indicator

 

2 BlueLEVEL BASIC units connected to a BlueMETER BASIC by means of radio transmission and linked to a PC

2 BlueLEVEL BASIC units connected to a BlueMETER BASIC by means of cables and linked to a PC

STRAIGHTNESS

  • Measurement of granite straight edges
  • Measurement of machine tool guideways
  • Air plane configuration checking (under different loads)
  • General load depending geometrical elements

PARALLELISM

  • Measurement of machine tool guide ways
  • Measurement of geometry of machines
  • Adjustment of printing machine assembly
  • Adjustment of platforms

FLATNESS

  • Flatness of measuring and setting plates in laboratories and on the shop floor
  • Flatness of tables of machine tools
  • Flatness of connecting surfaces of assemblies and subassemblies

SQUARENESS

  • Measurement of  machine tool guideways 
  • Measurement of master squares
  • Measurement of angular deviation between spindle and other elements of a machine tool

MACHINE TOOLS / ROTATION CHECKS

Measuring task / Goal:
A machine tool must be checked on possible geometrical deviations. The check must show up eventual rotations of the table during displacement. The measurement of geometry should be made in a quick, reliable and simple procedure ant thus with a good cost-benefit effect.

more

MACHINE TOOLS / ROTATION CHECKS

Measuring task / Goal:
A machine tool must be checked on possible geometrical deviations. The check must show up eventual rotations of the table during displacement.

The measurement of geometry should be made in a quick, reliable and simple procedure ant thus with a good cost benefit effect.

more

MEASURING - CALIBRATION / FLATNESS MEASUREMENT, ANGLES

Measuring task / Goal:
The calibration of granite master squares should be performed as easily and efficiently as possible. The equipment used should offer a good cost-benefit relationship and requirements regarding the qualification of staff should be as moderate as possible, enabling workshop staff to easily make use of the system.

more

FLATNESS MEASUREMENT ON A CIRCULAR SUPPORT OF A TURN TABLE

Measuring task / Goal:
The flatness of a circular support with 2.3m diameter has to be measured.

more

LARGE GRINDING MACHINE WITH FLAT GUIDEWAYS

Measuring task / Goal:

On a surface grinding machine with 18-meter-long guideways set 1.3m apart, the co-parallelism of the two guideways has to be checked periodically. The guideways have to be within a plane with a maximum tolerance (error) of less than 0.1 mm. The complete machine and its guideways can be adjusted by means of supporting screws placed at 750 mm intervals.

more

MEASUREMENT OF A CIRCLE ON A ROUND TABLE OF A GRINDING MACHINE

Measuring task / Goal:

The flatness of a rotating table of a grinding machine with a diameter of
3200 mm has to be measured. Thereby only the flatness of a circle has to be measured and not the whole table.

more

MEASUREMENT OF PITCH AND ROLL ON A GRINDING MACHINE

Measuring task / Goal:

On a large surface grinding machine with guide ways with a length of 18m and a distance of 1.3 m pitch and roll have to be checked regularly. The maximum tolerance is 0.1 mm/m.

more

MEASUREMENT OF THE RECTANGULARITY OF THE HEAD OF A ROUND TABLE GRINDING MACHINE

Measuring task / Goal:

The rectangularity of the axis of a grinding head of large grinding machine in relation to the support of a round table with a diameter of 3200 mm has to be measured. Based on the results the inclination of the head has to be adjusted.

more