wylerCONNECT

wylerCONNECT Configuration

Clear and brief...

Based on the WINDOWS 10 ® operating system, the wylerCONNECT interface connects WYLER software with WYLER instruments.


wylerCONNECT contains:

  • Bluetooth and Bluetooth Low Energy (BLE) modules to ensure direct wireless communication with the BlueSYSTEM family like BlueLEVEL, BlueLEVEL-2D, BlueCLINO series and also with the Clinotronic S.
  • IR receiver to trigger measurements via wylerTRIGGER (standard equipment)
  • Integrated license functions to manage software licenses
  • RS-485/232 interface allows connection of ZEROTRONIC or ZEROMATIC sensors via cable

Good news

1. Save money, be clever!

In applications which do not require a remote display - e.g. the measurement of granite plates - the wylerCONNECT, together with BlueLEVELs and the software wylerELEMENTS, offers the most cost-effective solution!

 

2. These devices are also supported:

Minilevel NT, BlueLEVEL Basic with Y-Extension.

 

3. License control with wylerCONNECT:

Check out  wylerSOFT Info-Center for wylerLICENSE.

Compativility


wylerCONNECT - connection options / wylerCONNECT - Verbindungsmöglichkeiten


Firmware update of the measuring devices

Required firmware update of the measuring devices in order to use the ylerCONNECT interface and current WYLER software products.

 

Firmware Update using wylerEXPLORER: Download: www.wylerag.com


Required firmware update of the Clinotronic S measuring device in order to use the wylerCONNECT interface and current WYLER software products. 


Wireless Bluetooth / Bluetooth Low Energy

Up to 7 BlueSYSTEM measuring instruments

or up to 6 BlueSYSTEM measuring instruments and max 1 Clinotronic S


Up to 7 Clinotronic S measuring devices 

or up to 6 Clinotronic S and max 1 BlueSYSTEM measuring device


The wylerCONNECT interface is not compatible with:

  • BlueMETER
  • BlueMETER SIGMA
  • LEVELMETER 2000
  • BlueTC

 


BlueSYSTEM family: 

One device connected directly via cable (universal cable RS485)


BlueSYSTEM family: 

Two devices connected directly via cable (universal cable RS485)


BlueSYSTEM family: 

A BlueMETER SIGMA or a BlueTC via cable; up to four BlueSYSTEM measuring devices. Attention! Maximum baud rate: 9600 Bd.


Discontinued devices: 

directly connected: Two MINILEVEL NT, using cable, without LEVELMETER 2000


Discontinued devices: 

directly connected: Two BlueLEVEL BASIC


Discontinued devices: 

directly connected: One LEVELMETER 2000 for two minilevel NT with RADIO 


Discontinued devices: 

directly connected:1 CLINO 2000 (no A-B function via wylerCONNECT)


wylerDYNAM software: Seatronic applications (57600 Bd) 

=> External 24V power supply always necessary!


ZEROTRONIC sensors Typ 3 & C: Always connect via MultiTC with external power supply.

  • For more than 8 ZEROTRONIC sensors, 6 Clinotronic PLUS / MINILEVEL NT or from a distance > 15m: always with external power supply.
  • Do not intermix with instruments from the BlueSYSTEM family.
  • The sampling rate decreases with an increasing number of connected instruments or sensors.

BlueSYSTEM family: for more than 3 devices connect them via MultiTC with external supply.

  • Do not mix with ZERONTRONIC sensors, Clinotronic PLUS or MINILEVEL NT.
  • The sampling rate decreases with an increasing number of sensors.

ZEROMATIC 2/1 & 2/2 sensors: Always connect via MultiTC with external power supply.

  • Do not intermix with instruments from the BlueSYSTEM family.
  • The sampling rate decreases with an increasing number of connected sensors  or instruments.