Power supply industry

POWER SUPPLY SECTOR / ALIGNMENT OF LARGE PUMP SHAFTS

Measuring task / Goal:

  • The horizontal positions of the connecting lines between the bearing faces on the bearing ring for the stator must be checked. The flatness and the fully horizontal position of the bearing ring must be assured.
  • The pump housing, one floor below, disposing of a round reference face must also be adjusted fully horizontally

The centre points of the pump shaft and the drive shaft of the motor must be aligned to each other in order to assure that the transmission shaft flanged in between can work free of any bending moment.

more

DAM MONITORING

Measuring task / Goal:

The inclination and inclination change of a dam is monitored and put in relation to climatic conditions and fill level of the dam. The sensors are mounted permanently and have an excellent zero point stability. The measured values are evaluated in a central station about 10km ( 6 miles ) away. 

more

MONITORING OF AN OFFSHORE WIND TURBINE TRIPOD DURING PLACEMENT AND ANCHORING IN THE SEA

Measuring task / Goal:
An offshore wind turbine requires a stable and exactly horizontal base. To achieve this, the tripod, on top of which a wind turbine will be mounted, has to be monitored during the whole anchoring process.

more

ALIGNMENT OF SOLAR PANELS

Measuring task / Goal:
Solar panels have to be perfectly adjusted to the sun in order to ensure best possible performance.

more