Calibration, flatness measurement and measurement of geometry of machine tools
CALIBRATION OF SURFACE PLATES (FLATNESS)
Subject:
The quality of granite references like surface plates, straight edges or squares must be checked and certified regularly.
Measuring task:
The measurement and calibration of granite master squares and surface plates should be performed efficiently.
MEASURING - CALIBRATION / FLATNESS MEASUREMENT, ANGLES
Subject:
The quality of granite references like surface plates, straight edges or squares must be checked and certified regularly.
Measuring task:
The measurement and calibration of granite master squares and surface plates should be performed efficiently.
ALIGNMENT OF A MOVABLE 3D MEASURING MACHINE
Subject:
The in-process control on a 3D measuring machine must be improved. The parts and elements to be checked, should not have to be moved to the quality assurance lab but should be controlled at the production line. To solve this requirement, the 3D machine must be built in such a way that it can be moved to the production line.
Measuring task:
In order to achieve the required accuracy, the measuring machine must be realigned after each transport. This process should be done efficiently.
CALIBRATION OF TESTING MACHINES
Measuring task:
Many testing machines, like those used for impact testing, require precise angle setting. They therefore must be recalibrated regularly.
RADIO ONCOLOG / CALIBRATION ON LINAC MECHANICS
Subject:
In order to keep service downtime of the Linac as short as possible, en efficient and accurate way to calibrate Gantry settings, collimator angle and to adjust Couch Roll is needed.
Measuring task / Goal:
The small dimensions (100x75x30 mm) and the light weight (485 Gramm) together with the 4 precise measuring bases situated around the periphery, make the CLINOTRONIC Plus the ideal instrument for the calibration task.
CALIBRATION OF ROBOTS
Subject:
The precision of an industry robot is directly depending on the precise alignment of each single axis.
Measuring task / Goal:
The offset of each axis has to be measured not only in
production, after mounting the robot, but also after the
installation at customer site. These offsets are then to be known and compensated by the process control system.
