Page 19 - Lehrbuch Neigungsmessung deutsch 2018.indd

COMPENDIUM INCLINATION MEASUREMENT
WYLER AG, WINTERTHUR / SWITZERLAND

1.16 QUALITY CONTROL AND CALIBRATION LAB SCS WYLER AG

For more than 75 years WYLER SWITZERLAND is specialized in the development, production and distribution of
precision instruments to measure inclination. The wide range includes various lines from high precision spirit levels
through hand held electronic inclinometers to high-tech sensors for measuring angles in a digital bus system.
The continuously increasing quality expectations as well as the demand for traceability of the measuring values
and calibration data has lead at an early stage to the application for accreditation as a calibration laboratory. This
accreditation has been granted by METAS / Metrology and accreditation Switzerland for the first time in 1993 under
their registration number SCS 044.
The Swiss Accreditation Service confirms that a laboratory, which is accredited in accordance with standards
ISO/IEC 17025, operates a quality system for its testing and calibration activities that also meets the relevant require-
ments of ISO 9001:2000 for the scope of accreditation Type C and ISO 9002:1994 for Type A and Type B. Further, standard
ISO/IEC 17025 covers several technical competence requirements that are not covered by Standards ISO 9001:1994 and
ISO 9002:1994.

THE CERTIFICATES
Within the framework of the certification possibilities, WYLER AG can issue 3 types of certificates:

Declaration of Conformity
All our products are delivered with a „Declaration of Conformity“ stating that the product is in conformity with the
applicable standards as well as with the technical specification published in our sales documentation.
The WYLER certificate
For products respectively measurements for which our laboratory is not accredited (e.g. straight and angular knife
edges, special setting squares, etc.) we can issue a „WYLER certificate“. The instruments or squares are inspected
according to the relevant standards. The certificate issued consists of a confirmation that the measuring object is in
accordance with the respective standard and of the measuring results recorded.

The SCS certificate
The measuring instruments respectively the surface plates
or setting angles are inspected and certified according to the
relevant standard. The certificate issued consists of a confirma-
tion that the measuring object is in accordance with the respec-
tive standard, that it has been measured and certified according
to the pro-
cedures prescribed by METAS / Metrology and accreditation
Switzerland. All the respective traceable measuring results are
part of the certificate.

Page 19