wylerCONNECT
wylerCONNECT Configuration
The wylerCONNECT is the interface for all our actual measuring instruments and sensors
It serves
- for our measuring instruments
- Bluetooth
- Bluetooth low energy (BLE)
- for our sensors via MultiTC
- RS 485 Interface
- for older instruments as CLINO 2000 / LEVELMETER 2000
- RS 232 Interface
- for the wylerTRIGGER
- IR-Receiver
- for our software packages
- License management
Clear and brief...
Based on the WINDOWS 10 ® operating system, the wylerCONNECT interface connects WYLER software with WYLER instruments.
wylerCONNECT contains:
- Bluetooth and Bluetooth Low Energy (BLE) modules to ensure direct wireless communication with the BlueSYSTEM family like BlueLEVEL, BlueLEVEL-2D, BlueCLINO series and also with the Clinotronic S.
- IR receiver to trigger measurements via wylerTRIGGER (standard equipment)
- Integrated license functions to manage software licenses
- RS-485/232 interface allows connection of ZEROTRONIC or ZEROMATIC sensors via cable
Good news
1. Save money, be clever!
In applications which do not require a remote display - e.g. the measurement of granite plates - the wylerCONNECT, together with BlueLEVELs and the software wylerELEMENTS, offers the most cost-effective solution!
2. These devices are also supported:
Minilevel NT, BlueLEVEL Basic with Y-Extension.
3. License control with wylerCONNECT:
Check out wylerSOFT Info-Center for wylerLICENSE.
Compativility
wylerCONNECT - connection options / wylerCONNECT - Verbindungsmöglichkeiten
Firmware update of the measuring devices
Wireless Bluetooth / Bluetooth Low Energy
Up to 7 Clinotronic S measuring devices
or up to 6 Clinotronic S and max 1 BlueSYSTEM measuring device
Discontinued devices:
directly connected: Two MINILEVEL NT, using cable, without LEVELMETER 2000
ZEROTRONIC sensors Typ 3 & C: Always connect via MultiTC with external power supply.
- For more than 8 ZEROTRONIC sensors, 6 Clinotronic PLUS / MINILEVEL NT or from a distance > 15m: always with external power supply.
- Do not intermix with instruments from the BlueSYSTEM family.
- The sampling rate decreases with an increasing number of connected instruments or sensors.
ZEROMATIC 2/1 & 2/2 sensors: Always connect via MultiTC with external power supply.
- Do not intermix with instruments from the BlueSYSTEM family.
- The sampling rate decreases with an increasing number of connected sensors or instruments.
Flyers
Download documents
Catalog Chapter - wylerCONNECT
Manual wylerCONNECT / english version
Manual wylerCONNECT / deutsche Version
QuickReferenz wylerCONNECT A5 / english version
QuickReferenz wylerCONNECT A5 / deutsche Version
Tips and technical support for the interface wylerCONNECT
Hinweise und technische Unterstützung-Einführung wylerCONNECT